Samsung CLP-310/CLP-315/CLX-3170/CLX-3175/CLT-K409S Toner Dolumu

Samsung CLP-310/CLP-315/CLX-3170/CLX-3175/CLT-K409S Toner Dolumu
Gürkan Akkuş : Saolasın abim toneride sizden almıştım trendyol üzerinden yine siz yardımcı oldunuz
Delly Icó : qual o melhor pó para toner da clp 310?
Bruce Adcox : This video features the CLT-Y409S (yellow) toner cartridge, not the CLT-K409S (black) toner cartridge as stated in the video title.

Visit SuperMediaStore.com to pick-up the Samsung CLT-K409S Toner Cartridge

http://www.supermediastore.com/product/u/samsung-clt-k409s-compatible-1500-yield-black-toner-cartridge

Looking for the Samsung CLT-K409S toner cartridge Of course you are. You've been scouring the web for the best deal on it for the past several hours. Think of SuperMediaStore as your beacon of salvation - a lighthouse brilliantly illuminating the night sky, showing you the way home amidst the shark-infested sea of other retailers. Their wide selection of OEM, remanufactured, and compatible ink, toner, and drum types covers many models from today's leading printer manufacturers. The best part? SuperMediaStore has these items ready to ship straight to your door and backed by our 100% satisfaction guarantee! You'll get a great deal on that Samsung CLT-K409S toner cartridge and you'll have absolute peace of mind in the entire process.

In addition to having the Samsung CLT-K409S toner cartridge, SuperMediaStore also has you covered when it comes to shopping for computer storage and other related accessories. So, visit SuperMediaStore today to pick-up your Samsung CLT-K409S toner cartridge and for your other everyday computer needs!

Samsung CLP310 320 360 CLX Drum unit Rebuilding Instructions

How to remanufacture and reset Samsung OPC Photoconductor Drum Unit for CLP-310 CLP-315 CLP-320 CLP-325 CLP-360 CLP-365 CLX-3170 CLX-3175 CLX-3180 CLX-3185 CLX3305 CLX3300 XPRESS-460W CLT-R409 CLT-R407 CLT-T406

- Activare Subtitles in your language! -

to reset the drum without the thermal fuse put a small piece of copper across the terminals of the resistor. Close the door and plug the printer in. It will initialize, followed by a flash of lights,
It will reset itself as it is unable to "blow" the fuse.
At this point unplug power and take out the holder with the resistor again. Take the small copper wire off and put the holder back in. Close the door and let the printer startup.

CLT-R406, CLT-R407 and CLT-R409 drum units are different and not interchangeable, but the remanufacturing instructions are the same.

Things needed:
- Screwdriver
- Drum
- Resistor for use in Samsung drum unit

How to fix Samsung printer with error red light:
The drum has a resistors that is used to calculate toner coverage. The resistors contains calculated limitation that was managed by Samsung. If toner coverage is 5%, the resistor is delivered 20000 black pages and 5000 color pages.
When the resistors overload its calculated limitation, the printer will be locked and will send an error message. Change this resistor to solve the problem.

For any question or suggestion leave a comment
--------------------------------------------
Link Accessori srl
Via Beverara 224/7
40131 BOLOGNA (Italy)
http://www.linkaccessori.it
email: link.accessori@libero.it

other links:
http://www.emmegiricambi.it/
http://www.samsung.com/it/consumer/pc...






-------------------------------------------------------------------------
lloyd dobbler : Thank you very much for this video. I was able to fix "image ghosting" on a Samsung CLP-315W by following your instructions to clean the charge roller with water. Imaging Unit was only at 1100pgs, 84% life remaining, but living in dry climate(Denver, CO) made the charge roller(and foam roller) ineffective at removing excess image toner.
Imaging unit drum was diagnosed as culprit by measuring 7.5 vertical inches between original image and ghosted image. Again, 10,000 thanks.
Sergei Posokhov : Original factory units that come with the printer do not have the thermal fuse anyways. In order to reset the drum without the thermal fuse, just put a jumper across the terminals of the resistor (small piece of copper wire will do). Close the door and plug the printer in. It will say "Initialize..." followed by a flash of lights, after which it will most probably reset itself as it is unable to "blow" the fuse (the cycle will repeat itself indefinitely). At this point switch it off (unplug power) and take out the holder with the resistor again. Take the jumper off (break the wire) and put the holder back in. Close the door and let the printer startup.
Tested on CLX-3300 series with CLT-R406 drum.
Mtech Toner : Thank you for sharing. Had all that I needed to know to fix my outdated printer.
Penurious Sierra : I found that my imaging unit had an overflowing toner that stacks up from the top. Following your guide, I cleared out the waste toner tank (there was a TON of powder). Let's see what happens.
Martin Dorrance : Thanks for your videos. I have followed your steps and it became obvious that my smudgy printing was due to waste toner everywhere after printing envelopes etc. After rebuilding I am still getting big patches of no or feint print but some decent print across the full page in places. Also, any pictures including the test page come out as a yellow smudge. Any ideas please?

...