삼성ml1660k
페이지 정보
본문
Samsung ML1660 ML1665 SCX3200 MLT-D104S - Refill Toner cartridge
How to Remanufacture The Samsung ML-1660 ML-1665 ML-1670 ML-1675 ML-1860 ML-1865 ML-1667 SCX-3200 SCX-3205 MLT-D104S toner cartridge.
This printer uses an all-in-one toner style cartridge with drum and a chip.
The new printer has a starter toner cartridge that prints 700 pages at 5% coverage.
Standard cartridges have a yield of 1,500 pages.
The only difference between starter cartridge and standard cartidge is the quantity of toner.
The starter toner cartridge contains less than 20 gr. of toner, standard cartridge contains 45 gr. of toner.
Compatible cartridges made in China may have some difference.
PRINTING SUPPLIES INFORMATION PAGE
- turn the printer on
- press the one-touch button until the "Ready" light blinks 3 times
- press twice slow
- at the first fast blink that follows, release the button.
REPETITIVE DEFECT CHART
Drum: 62,83 mm
Transference roller: 40,52 mm
Charge Roller: 26 mm
Developer roller: 45 mm
Pressure fuser roller: 64 mm
Fuser roller: 64 mm
REQUIRED TOOLS:
screwdriver
knife to cut the rivets
Phillips screwdriver
Needle nose pliers
SUPPLIES NEEDED:
toner for Samsung ML1660 (50 grams)
chip
drum (if damaged)
For any question or suggestion leave a comment
--------------------------------------------
Link Accessori srl
Via Beverara 224/7
40131 BOLOGNA (Italy)
http://www.linkaccessori.it/
email: link.accessori@libero.it
other links:
http://www.emmegiricambi.it/
http://www.samsung.com/it/consumer/pc-peripherals-printer/printers-multifunction
-------------------------------------------------------------------------
Mtech Toner : Thank you, bro. It's help a lot.
Rafael Téllez Girón : Thanks. Its a good explanation.
mountasser : thinks very much it was helpful
S S : When ink is low on the MLT-D104S can your override your printer so you use every last bit of ink? My pages were printing not too bad and now it claims I need to replace?
Thiwanka Wimalasuriya : Where can we buy the chip ?
How to Clean a Samsung Printer Fuser
How to clean the fuser rollers in a laser printer Samsung ML-1660 ML-1665 ML-1670 ML-1675 ML-1860 ,L1856W ML-2160 ML-2165 M-2020 X-Press M2070 and other, without disassembling the printer.
For any question or suggestion leave a comment
--------------------------------------------
Link Accessori srl
Via Beverara 224/7
40131 BOLOGNA (Italy)
http://www.linkaccessori.it
email: link.accessori@libero.it
other links:
http://www.emmegiricambi.it/
http://www.samsung.com/it/consumer/pc-peripherals-printer/printers-multifunction
-------------------------------------------------------------------------
DjDiabolik : mmmmm.. i have found this video by google after search some information about error #A3-3112 i obtain whiy a ML-1670.... i don't thinks what's the problems........ but i thinks i can trash this.....
C J Allison : Very helpful video. Uncomplicated and asy to follow.
Erika17725ify : Gracias, en vez de alcohol use thinner y se limpio mas rapido
Diane Traynor : I have replaced the fuser unit in my Samsung Xpresss C1860FW Printer but cannot reset the display. its still showing replace the fuser unit - help!!!
Tony Peterson : Thank you for taking the time and trouble to make this video. It helped fix my problem. Somewhere, sometime on the interwebs I will buy you a beer
Disassembly Samsung ML-1660 1665 Laser Printer
How to take apart Samsung laser printer ML-1660 ML-1665 ML-1860: Fuser unit, Laser scanner unit, Main board, Pick-up Roller.
For any question or suggestion leave a comment
--------------------------------------------
Link Accessori srl
Via Beverara 224/7
40131 BOLOGNA (Italy)
http://www.linkaccessori.it
email: link.accessori@libero.it
other links:
http://www.emmegiricambi.it/
http://www.samsung.com
-------------------------------------------------------------------------
edmarco oliveira : Parabéns, vídeo muito bem explicado. Me ajudou muito. Obrigado
Julnn Brol : Thank you brother, I had a sheet stuck and thanks to you I took it out without taking it with a special
Evans Picolo : Best disassembly tutorial EVER! Internet needs more videos like this.
Armand San : Buenos tardes, te felicito muy buen vídeo y te comento, tengo una Samsung ml 1610 que al mandar a imprimir, algo gira y rechina mucho, la destape y la aspire y le puse un poco de grasa por donde pude a los engranes, y después de unas cuantas impresiones volvió a rechinar, que crees que sea?, ojala y me puedas apoyar, saludos
Mario Ivan Dominguez Zapata : Excelente video, todo muy bien explicado. Tengo un problema con una ML-1675 y es que al imprimir se atasca el papel pero con la segunda hoja, si solo se quiere imprimir una hoja no hay problema, pero cuando el documento tiene más de una hoja ahí si se atasca la hoja en la segunda hoja y se bloquea la impresora siendo necesario sacar el papel. Les agradezco cualquier sugerencia que me puedan dar para solucionar el problema. Ya cambié el tonner.
How to Remanufacture The Samsung ML-1660 ML-1665 ML-1670 ML-1675 ML-1860 ML-1865 ML-1667 SCX-3200 SCX-3205 MLT-D104S toner cartridge.
This printer uses an all-in-one toner style cartridge with drum and a chip.
The new printer has a starter toner cartridge that prints 700 pages at 5% coverage.
Standard cartridges have a yield of 1,500 pages.
The only difference between starter cartridge and standard cartidge is the quantity of toner.
The starter toner cartridge contains less than 20 gr. of toner, standard cartridge contains 45 gr. of toner.
Compatible cartridges made in China may have some difference.
PRINTING SUPPLIES INFORMATION PAGE
- turn the printer on
- press the one-touch button until the "Ready" light blinks 3 times
- press twice slow
- at the first fast blink that follows, release the button.
REPETITIVE DEFECT CHART
Drum: 62,83 mm
Transference roller: 40,52 mm
Charge Roller: 26 mm
Developer roller: 45 mm
Pressure fuser roller: 64 mm
Fuser roller: 64 mm
REQUIRED TOOLS:
screwdriver
knife to cut the rivets
Phillips screwdriver
Needle nose pliers
SUPPLIES NEEDED:
toner for Samsung ML1660 (50 grams)
chip
drum (if damaged)
For any question or suggestion leave a comment
--------------------------------------------
Link Accessori srl
Via Beverara 224/7
40131 BOLOGNA (Italy)
http://www.linkaccessori.it/
email: link.accessori@libero.it
other links:
http://www.emmegiricambi.it/
http://www.samsung.com/it/consumer/pc-peripherals-printer/printers-multifunction
-------------------------------------------------------------------------
Mtech Toner : Thank you, bro. It's help a lot.
Rafael Téllez Girón : Thanks. Its a good explanation.
mountasser : thinks very much it was helpful
S S : When ink is low on the MLT-D104S can your override your printer so you use every last bit of ink? My pages were printing not too bad and now it claims I need to replace?
Thiwanka Wimalasuriya : Where can we buy the chip ?
How to Clean a Samsung Printer Fuser
How to clean the fuser rollers in a laser printer Samsung ML-1660 ML-1665 ML-1670 ML-1675 ML-1860 ,L1856W ML-2160 ML-2165 M-2020 X-Press M2070 and other, without disassembling the printer.
For any question or suggestion leave a comment
--------------------------------------------
Link Accessori srl
Via Beverara 224/7
40131 BOLOGNA (Italy)
http://www.linkaccessori.it
email: link.accessori@libero.it
other links:
http://www.emmegiricambi.it/
http://www.samsung.com/it/consumer/pc-peripherals-printer/printers-multifunction
-------------------------------------------------------------------------
DjDiabolik : mmmmm.. i have found this video by google after search some information about error #A3-3112 i obtain whiy a ML-1670.... i don't thinks what's the problems........ but i thinks i can trash this.....
C J Allison : Very helpful video. Uncomplicated and asy to follow.
Erika17725ify : Gracias, en vez de alcohol use thinner y se limpio mas rapido
Diane Traynor : I have replaced the fuser unit in my Samsung Xpresss C1860FW Printer but cannot reset the display. its still showing replace the fuser unit - help!!!
Tony Peterson : Thank you for taking the time and trouble to make this video. It helped fix my problem. Somewhere, sometime on the interwebs I will buy you a beer
Disassembly Samsung ML-1660 1665 Laser Printer
How to take apart Samsung laser printer ML-1660 ML-1665 ML-1860: Fuser unit, Laser scanner unit, Main board, Pick-up Roller.
For any question or suggestion leave a comment
--------------------------------------------
Link Accessori srl
Via Beverara 224/7
40131 BOLOGNA (Italy)
http://www.linkaccessori.it
email: link.accessori@libero.it
other links:
http://www.emmegiricambi.it/
http://www.samsung.com
-------------------------------------------------------------------------
edmarco oliveira : Parabéns, vídeo muito bem explicado. Me ajudou muito. Obrigado
Julnn Brol : Thank you brother, I had a sheet stuck and thanks to you I took it out without taking it with a special
Evans Picolo : Best disassembly tutorial EVER! Internet needs more videos like this.
Armand San : Buenos tardes, te felicito muy buen vídeo y te comento, tengo una Samsung ml 1610 que al mandar a imprimir, algo gira y rechina mucho, la destape y la aspire y le puse un poco de grasa por donde pude a los engranes, y después de unas cuantas impresiones volvió a rechinar, que crees que sea?, ojala y me puedas apoyar, saludos
Mario Ivan Dominguez Zapata : Excelente video, todo muy bien explicado. Tengo un problema con una ML-1675 y es que al imprimir se atasca el papel pero con la segunda hoja, si solo se quiere imprimir una hoja no hay problema, pero cuando el documento tiene más de una hoja ahí si se atasca la hoja en la segunda hoja y se bloquea la impresora siendo necesario sacar el papel. Les agradezco cualquier sugerencia que me puedan dar para solucionar el problema. Ya cambié el tonner.
... 
댓글목록
등록된 댓글이 없습니다.
